Questions & Answers for: fix agitator

...agitator. This is an easy fix. You just get the new ones (usually 10$ or less), pull the top cover off the agitator, then pull the center cap off inside of the agitator. Then you just remove the ...

...agitator. is there a simple fix? like this since new YES THERE IS! REMOVE AGITATOR BY TAKING THE SCREW OUT UNDER THE CAP. PULL UP ON AGITATOR TURN UPSIDE DOWN WILL FIND 4 AGITATOR DOGS REPLACE THESE ...

cup and cover underneath. Remove bolt and upper agitator. Simple fix. New parts have instructions to repair. Get the correct model number and buy it from an appliance parts place. Around $20.00 retail

...to purchase an agitator kit from whirlpool or, an aftermarket circuit. installing a new agitator kit will fix this issue. one or more of the main agitator components have become stripped or,

...fix myself? is it worth fixing or should I look at replacing it? other than that its a good 15 yr old washer. This assumes that you have a basic Kenmore / Whirlpool top load, direct drive, neutral ...

...the next agitate cycle then I need to pull on the knob again to start the agitate. timer bad easy

...fix... the agitator will need to be removed... usually only involving one screw in the top of it... the parts you need are called dog agits... they come in a package of 4... once you get the agitator ...

...agitator is slipping how can i fix this problem and what parts do I need. Agitator is slipping. How do I fix the problem and what parts will I need. Agitator Repair Kit Item #2744 ...

...fix. The agitator cogs are worn out and or broken. The repair kit PS334650. Just pop the top off the agitator, remove the dust cover inside, and then remove the agitator cogs. It takes a 11mm socket ...

...else works in the machine, except the agitator. Is this a machine withwith an agitator & a fixed drum? If this is the case I would think that the drive belt has stretched or