Questions & Answers for: Velodyne how to fix a subwoofer loose wire

...subwoofer speaker from the unit and hooked the speaker directly to speaker wires for the front speakers and the speaker itself plays sound, so I know the speaker isn't blown. What can be the problem? ...

connecting amp back to subwoofer on a velodyne spl 8 the 3 wires in ther back of the sub, how do they connect to the amp? there's a J5 J3 and one other wire You will need to contact Velodyne.

I hear some noise coming out from the woofer of CHT-12R I have a velodyne CHT-12R and I hear some noise coming out from the woofer like something is knocking each others. Could it be due to some loose

I get a buzzing noise whenever the sub is powered on and connected to the preamp. Tried it on several amps; same result. You might have got an earth lead loose. If that is not the case then I would ...

Can the Velodyne DLS 3500 subwoofers be wiring in series vs. solo? I have two (one for TV and one for sound) and I would like to wire them up in series for the sound side of my system. Is there a ...

...fix? Already replacecd the cables. web search "subwoofer humming when off" I purchased a used DPS-12 that has the same 'humm' problem including change in volume when touching the back plate. Sounds ...

8 INCH MTX ROAD THUNDER SUBWOOFER WON'T WORK NO SOUND NO NOTHING 8 INCH MTX ROAD THUNDER SUBWOOFER WON'T WORK NO SOUND NO NOTHING has it ever worked, if so did you ever use it in the cold ...

fix is loose terminals. This happens often where all you do is pull the terminal off and very gently squeeze it a little with a pair of pliers. The hard part is finding it in the speaker itself. There

...to fix. Any other possibilities for rehab? The amp is clipping.. witch could mean there is a bad or lose ground, or wire are lose on speaker or worst you voice coil is melted. good luck home this ...

what can cause a sub woofer and room speaker woofer to stop listening to music fairly loud left the room and returned minutes later the sub woofer had stopped no sound power light still on room ...