Questions & Answers for: ford ranger temperature sensor

...ranger 3.0 I need to know which two wires coming from the maf sensor are the iat sensor. Thanks the IAT is not controlled, it simply provides information to the PCM about the temperature of the air ...

...not temp sensor by radiator hose temperature switch in engine block 1996 ford ranger 4 cyl 2.3 The single wire sensor for the gauge is located in the engine block directly below the #4 exhaust

ford ranger? We put another motor in it and now all gauges work except for the oil pressure gauge and the water temp gauge. All is connected. What now? you should switch the temperature sensor and oil

ford ranger I have a 1995 ford ranger 4 litre 4x4 super cab. High temperature warning light goes on intermittently yet engine does not overheat. Runs long trips with no problems. Truck runs great. Not

changing the temp sensor on a 2005 ford ranger Need to change the temperature sensor Remove battery terminal wire and then replace the sensor with the same one.

Ford Ranger Super Cab MAF problems My 1994 Ford Ranger will NOT hardly run. Plugs, wires, O2 sensors, MAF sensor, fuel pump, and pressure regulator have been replaced. When I disconnect my MAF sensor,

ford ranger 2.0L is running rough and missing and blowing black smoke why is my 1988 ford ranger 2.0L running rough and missing and blowing black smoke Sounds like it is running rich, could be a stuck

...1995 Ford Ranger 2.L temperature gauge sensor ? 1995 Ford Ranger 2.3 L The water temp sender is 22 in the picture, close to the oil filter. One wire connector, wire color, red with a white

...1998 ford ranger. now the temp gauge not working. any ideas!!! You may have disconnected the wire on the sensor.it's close the the thermostat.Check this out. 1995 ford ranger coolant temperature ...

...Ford Ranger 2.3. Where is the location of the engine temperature sensor please? Question edited for clarity, make sentence and toss in some CAPS. Question moved to model category. The engine coolant ...