Questions & Answers for: ford taurus idle problems

Ad

...ford taurus. Had battery and belt replaced. cuts off have a 2004 taurus, replaced belt and battery. However, problem is when the car idles. it cuts off. I was told the air conditioner replacement ...

Ad

Question about 2003 Taurus

1 Answer

Taurus 3.0 DOHC efi has 128k miles, but overall drives great. My problem is that when I come to a stop within a moment or two the rmp's drop and then the car chugs a little then stalls. It starts back

Ad

Ford Taurus 2005 model. Too high rpms in idle. Ford Taurus 2005 model. On first start in the morning, rpms are exceedingly high in idle about 4000. Changed spark plugs and wires, ran sea foam ...

...ford taurus s/w idling high. any ideas? Sometimes a high idle can be caused by the oxygen sensor being faulty. These are available cheap on E bay @ CBS automotive. I have a contour which had the same ...

2002 ford taurus idle high in park and in gear.how do i adjust this problem? sounds like you got a vacuum leak or your IAC idle air control motor is going out.my best guess to start with.

Question about 2001 Taurus

1 Answer

FORD TAURUS IDLES BAD It will start to idle real low. Is it a sensor? i recently had this issue with my 2001 taurus dohc engine. when you drive it seems that everything is fine. when you stop, the car

...Ford Taurus 3.0 and i'm having problems with the idle.....it's even noticable in the runability now. Replaced idle air control valve, sensor on the gas tank, spark plugs wire, coil ...

ford taurus idle high code P1506 2000 taurus 3.0 DOHC 24 valve, code P1506, idle high The code is for the idle air control valve which controls idle speed. The problem could be a faulty control valve,

...cold when it is cold out my 91 ford Taurus idles slow and runs real rough until it warms up then it is fine. what could be the problem spark plugs work better when theyre hot so change spark

Question about 2001 Taurus

1 Answer

ford taurus starts fine idles fine but when you put it in drive doesnt want to pull. First of all I need more information. But on a guess, I would say you might have a half shaft problem. Does the car

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...