...the clutch and releasing it the gears are stuck Sorry to have to say this, you have a bent shift fork. The repair means taking the engine out of the frame then removing the top end, removing the ...
i have a 2001 rm 250, my front forks have gone totaly, what could the problem be? fork seals might be gone, lost all the oil. replace seals and oil.
got a rm250 1999 its keeps jumping out of secon gear wen the power ban kicks in Unfortunately, this most likely means that you've got worn or damaged parts inside the transmission - which also means ...
replacing fork seals and need to know amount of oil for outer fork on a twin cartridge tpye fork, rm250 2005 try about 250-350 cc
replacing fork seals and need to know amount of Replacing fork seals and need to know amount of oil for outer fork on a twin cartridge tpye fork rm250 2005 Outer cartridge on the twin chamber Showa ...
Correct quantity(ml) of oil per front shock(fork) for 2003 Suzuki RM250 110mm oil height in each fork tube. Remember to bleed it first to ensure all air is out the inner chamber and then measure 110mm
what is the spec for oil in the front forks on a 2004 suzuki rm 250 If you have the stock valving, I would run 2.5w Motorex in the damper to compensate for the stiff feel stock, and thicker oil in the
The forks are not lined up true to the front wheel. you son need a new wheel :/ and or forks
Suzuki rm 250 2003 model..........The front forks are dropping down and you have to pull them up to correct position. Do I need to put fork oil? How much and where do I drain off the old oil? use the ...
how do you remove the bottom bolt on the fork tube, the one with the large allen head. It fit's up into the bottom of the tube. Which way does it turn? left hand threads or right hand? Both sides ...
Usually answered in minutes!
158 Questions
32 Questions
28 Questions
0 Questions