fork oil capacity The easy way is to remove the top caps from the forks, then the springs. Compress the forks to the stops and then fill the forks to 150mm(6inches) from the top. Refit springs and ...
...fork cap, you will need to remove the clip # 5 and the bolt # 18 then in a slide hammer type action, pull the upper tube out of the lower tube. There is a washer underneath the fork seal that will ...
...cap on top of forks hi buddy you unscrew the fork cap then pull it thrpugh a bit then below the fork cap will be the lock nut you need to hold the fork cap and lossen the locknut and it wil spin ...
Question about 2000 FLHRCI Road King Classic
...snug. If you tighten either of these caps too tightly, you could encounter problems with removal in the future. If you are talking about the fork cap at the axle, the nuts torque to 12-15 foot
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
...fork leg once haveing drained the oil you can remove the caps keeping downwards presure on the caps there is not a great deal of presure the reason for keeping presure on the caps whilst undoing them ...
...fork cap off be careful the top cap is spring loaded get a pan to catch the oil,remove the drain bolt let it drain.reolace the drain bolt then you can add your new fork oil,check your owners manual ...
front forks how do I fill the forks with oil most forks are filled by removing/un-screwing the top caps off your forks, watch the spring as you remove the caps, if its loaded it may fly out at your ...
...each fork remove end cap and drain plug over a bucket drain oil from each fork reinstall drain plug on lower leg, replace oil thought top of the fork to spec, replace end caps and bleed oil from ...
...fork cap bolt topside securely clamp the fork into the tool, remove the fork cap bolt, remove and discard the quad ring seal, carefully remove the fork tube plug from the fork tube and because it is ...
...cap of the fork. Loosen the bottom triple clamp and slide the fork out of the bike. Remove the top cap of the fork.There is spring pressure pushing against the cap, but if the fork is not being ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions