over heating i just bought a 525.first problem was overheating then i stripped the hex bolt for oil screen.for overheating issue i was told to rejet to 185 @ 45 and change out pipe for restriction! ...
weak spark.got oil in stator casing.is this ok? weak spark.got oil in stator casing on my ktm 520sx 2001 model.is this ok? Hi ridge, good move will be have the recoil replaced and have the seals ...
I have a 2005 KTM 525 SX that burns alot of oil, and makes blue smoke, but still has lots of compression and power, I'm just wondering if it would be piston rings or Valve problems? Could be the valve
my bike wont go into 1st gear without dieing it runs fine except for that and tried bleeding the clutch assuming there is nothing major wrong with the clutch and you have pressure at the lever. The ...
I have a rattle noise in the lower end that gets worse when put in gear it wasn't to bad till a mud race and the clutch was being abused after that it was horrible and now makes a squawking noise ...
...fork oil in a 2005 525exc its not how much, the oil level has to be set after the dampening rod assembly has been properly bled out. With the spring removed and the fork collapsed, the oil level ...
Usually answered in minutes!
11 Questions
2 Questions