Questions & Answers for: Yamaha Ybr 125 fork oil level

...oil up since now. I checked the level Thursday 19 March 09 and it was on the low on the dipstick (Her oil was changed in december) so topped her up to half way, i rode her to my home town about 100 ...

Ad

Question about 2005 Ybr 125

1 Answer

fork oil capacity what amount of fork oil should i put into the front forks of a yamaha ybr 125 ed 2007 model medium fork oil - 150 mls in each leg

Ad

Question about 2005 Ybr 125

1 Answer

...like you have managed to get them onto the caliper. Before you can put the caliper onto the front fork you need to force the piston back into the caliper. You can do this with a screwdriver. Use

Question about 2005 Ybr 125

1 Answer

front telescopic is getting stock Flush your forks and refill to comfortable setting

Question about 2005 Ybr 125

1 Answer

both forks pitted and need replacement forks,where can i get them from and will any other forks fit. Well - seeing as how we have absolutely NO INFO on what bike you are working on, I would strongly ...

...fork oil capacity Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 ...

Question about 2005 Ybr 125

0 Answer

...oil to correct level and took it out for a ride, no more than 20 minutes. Now there is a squeak coming from the engine, pretty loud and worst when idling (or at least more noticeable). It ...

Question about 2006 Ybr 125

0 Answer

fork oil capacity fork oil capacity Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for

Question about 2006 Ybr 125

2 Answers

oil level causes the front fork to produce a noise at full rebound or the rider to feel some pres- sure on his hands or body. Alternatively, too high oil level will develop unexpectedly early oil lock

Question about 2006 Ybr 125

1 Answer

do you mean it just wont select at all what ever ? mite have bent the selecter fork ! remove clutch cover while the bike is leaning over on opposite side so oil stays in ! look and operate gear lever

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...