Questions & Answers for: four wheel drive

...four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four ...

...four wheel drive quit working. It While driving, four wheel drive quit working. It stays in two wheel drive now and will not engage into four wheel drive, high or low. Check the fuse for the four ...

four wheel drive lights dont come on wont go into four wheel drive lights dont come on mounted to the tranfer case you will see what looks like a window motor. Round with wires coming out. This is the

four wheel drive lights flash when you try to put it in four wheel drive. i have tried to replace the four wheel drive switch and it does the same thing. There is a four wheel drive relay unit located

...Four Wheel Drive" There will be a lever on the floor, or a button on the dash that you have to activate to get into four wheel drive. Usually for the latter there will be a light next to the four ...

...the botton for four wheel drive high, the lights flash, but then clicks back into 2 wheel drive. Four wheel drive works though. its a 1995 Jimmy Four Wheel Drive Selector Motor On The Transfer

four wheel drive. went to engage it in four wheel drive with the switch and no light came on on the dashboard and no four wheel drive. a few hours later turned switch again. it engaged into four wheel

...it into four wheel it drives. it is an automatic four wheel drive. Check the soildnoid that engages 4x4 by switching it from 2 to 4 wheel drive and listen to it 27 dollar part if needed to be ...

...four wheel drive can I bypass the switch or what to do to get it out of 4 wheel drive all wheel drive is four wheel drive , i think you mean back to 2 wheel drive , no way to bypass the four drive ...

...four-wheel drive when you engage the system. Some common issues include: The four-wheel drive system may not be properly engaged. Make sure that the four-wheel drive switch is in the correct position ...