Questions & Answers for: four wheel drive problems

four wheel drive problem Put it in four wheel drive and only the rear wheels spin. Put it in four low and its in low gear but only the rear wheels spin Check your vacumm lines from the vacuum switch ...

...four wheel drive low i have try to put it in 2 wheel drive high and four wheel drive high but it still coomes up on dash that its four wheel drive low .any idea what the problem could be I have 2002 ...

...four wheel drive is engaged? In two wheel high vehicle sounds normal, at complete stop four wheel drive is engaged and soon after I begin driving (within 20') a loud clank/click noise is ...

four wheel drive. went to engage it in four wheel drive with the switch and no light came on on the dashboard and no four wheel drive. a few hours later turned switch again. it engaged into four wheel

...four wheel drive Abs light came on and four wheel drive stopped working. Wonder if the abs problem can keep the four wheel drive from working. I suggest scanned the ABS module in order to know fault ...

...four wheel drive 1984 Chevy custom deluxe half ton pickup won't work. I heard a pop while driving and all of a sudden the front end of the four wheel drive wasn't working. I was driving on my ...

...four wheel drive it stops change back to 2 wheel drive it starts again. Check everything in that right front driveline. Could have a problem that when the four wheel drive puts some tension on it, it ...

...four wheel drive engaged & driven for awhile I put jeep in four wheel drive & drive it. It makes a load rumbling noise while in four wheel drive. When I stop the vehical. I noticed smoke coming ...

four wheel drive problems I have a 2004 chevy s10 my switch was stuck in 2 wheel drive i disconnected battery than reconnected and now it switches to four wheel drive and back to 2 but my four wheel ...

...four-wheel drive when you engage the system. Some common issues include: The four-wheel drive system may not be properly engaged. Make sure that the four-wheel drive switch is in the correct position ...