Questions & Answers for: frame horn

...horn 2 wire connection 1 grounds to frame was 2 horns on car replacing to one horn. what is the right connection for this for one horn only? So you have replaced the single horn and it still dosen't ...

frame area. Unplug the black wire from the horn's plug socket. While you shop for new horns at the store, use the original horn to determine the new horn's plug socket can fit the black wire plug that

...frame of the vehicle. You could try changing the horn relay , which is located under the hood, in the engine compartment fuse block. It should be clearly marked on the cover. Or, it could be the horn ...

horn does not work fuse are good Probably a bad ground to the frame at horn . Check for grounding &/or black wire ground to frame. Clean with emery cloth or sand paper. Good luck!

...horn it self, it works. What wrong bad relay? The horn grounds to the frame so make sure it & the frame are well sanded & clean on both surfaces. This should solve the problem. Good

...both the frame and the horn and remount as a bad ground will prevent it from working also. If voltage is good at fuse and not present at horn when button activated it could be bad switch or ...

...horn, if it works replace it to the frame,( if it does not work replace the horn) next you need to check for power at the horn feed wire, at the horn using a test light with the ignition on put 1end ...

...across the terminals of the horn, can you read 12V ? Then check the both terminals one at a time to the car frame or engine block, If you read 12v on both terminals the ground to frame is

...is present then u have an issue with ground to the horn. If no voltage is present, check the fuse. 8f voltage is present, check voltage from horn wire to frame, if voltage is present, replace ...

...frame. Press the horn button, do you see the meter jump up to 12v when you do this? Yes - Replace the horn assembly. It's getting voltage but not sounding. No - Suspect that the wiring or the horn ...