Questions & Answers for: frigidaire dispensing crushed ice

...removed the container and made sure the gear is spinning. Then put the container back and no ice. Some times it workes some times it doesn't. ice dispenser does not dispense crushed ice...only ...

Frigidaire Gallery Series Side by Side doesn't crush ice Ice maker doesn't dispense crush ice now. Dispenses water, makes ice cubes, dispenses ice cubes. Crushed Ice lever dispenses whole ice cubes ...

...crushed ice Frigidaire model plrs2672a. When cubed ice selection is made the auger turns and crushes ice. This option did work at one point,however, not in 3 yrs. I had this same problem for a few ...

...crushed ice Gallery refrigerator - with the button selected to dispense cubed ice on the door it will only dispense crushed ice Pull out the ice drawer and close the door switch the crushed /cubed ...

...dispensing bucket. This rod goes through a hole in the back wall of the freezer where a solenoid should pull up on the rod allowing the ice cubes to dispense without being crushed. If this solenoid ...

...crushed ice, not cubes. My Frigidaire Elements side by side will only dispense "crushed ice" even though the setting is on "cube". I have changed it back and forth with no effect and have cleared out ...

...crushed ice and will not dispense ice cubes Icemaker model # GSI 26 PROBLEM: Choosing "crushed" produces crushed ice! Choosing "cube" also produces crushed ice. The green LED indicators illuminate ...

Frigidaire Model GLHS68EGSB2, ice maker will only dispense crush ice even if you press the ice cube dispenser You need to take out the ice bucket, empty it, let the bucket sit in the sink for a few ...

...Frigidaire refrigerator, model# FRS23H7CS, is crushing your ice, but will not dispense the crushed ice. It sounds like the dispenser is possibly jammed. Follow the following steps for a possible ...

...Frigidaire refrigerator, model# FRS26R4A. You will need to push the "Cube" button for the ice dispenser to stop dispensing crushed ice. I ask that you please follow up with a comment on the post, at ...