Questions & Answers for: frigidaire freezer keep things frozen

freezer keeping things frozen, & has frost on back wall. How do you find the thermostat or defrost to see how to replace?? Any tips on this problem You will probably have to completely defrost fridge,

...but not cooling, freezer not cold enough to freeze or keep things frozen. was told that a relay or somekind of motor maybe bad. Frigidaire # FRT21LRGW2 is it buzzing and clicking every few

...Frigidaire model frt21il5db wont stay cold and freezer ices over on back wall but wont keep items frozen. This was manufactured in 06-05 any info would be great....... thanks, Brian Hi Brian, I ...

...frigidaire upright freezer.. it keeps things frozen for a while then freezes up and starts runnin warm.. i mean, it's still cold (30-40 degrees). i have noticed frost accumulating on the back wall ...

...freezer is frosting up and not keeping things frozen... tried turning them up to coldest setting.. waited a day and still nothing ..you can hear the condersor turn on and the fan.. any advice? Fridge ...

freezer will not keep food frozen. Please Help! Hello, Sounds like you have a bad door switch. Depending on the age of the fridge, it might still be under warranty. If it's not, then you might be able

...frigidaire top mount refrigerator. The freeze keeps things frozen although it doesn't seem to run often causing condensation to drip from the top of the freezer. Ice gets frozen and everything stays ...

...keep things frozen. and some times water does come out at the botton Hello Check that it set cold because its not below -2 or -5 thats why dose not freeze anything it needs to be at least by -10 to ...

...freezer on your Frigidaire refrigerator, model# FRS3R5EMB, will not make ice or keep anything frozen in the summer months. First, I suggest lowering the temperature in your freezer and allowing 24 ...

...Frigidaire freezer, LFFU14F5HWC, changing on the display and the inside light is flashing off. This sounds like a possible problem with your panel or socket. I would recommend performing a reset on ...