Questions & Answers for: Mazda MPV front door

Question about 2000 MPV

5 Answers

...front hood? I check the fuse according to the manual it is ok.Power door lock switch on driver side don't work.I try to press that switch it don't open or close door I do it manually by using door ...

Ad

Question about 2003 MPV

3 Answers

...door handle 3. Remove the screw that is now visible 4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the ...

Ad

...door handle 3. Remove the screw that is now visible 4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the ...

...door handle 3. Remove the screw that is now visible 4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the ...

...front door glass completely. Disconnect the negative battery cable. Remove the door screen. Disconnect the front door lock actuator connector. Disconnect the rods and the cables. Remove the screws, ...

Question about 2003 MPV

1 Answer

front passenger will not work a local mechanic says it could be the window motor, but I can't get the door panel off. But what the hey I don't know how to test the motor anyway. Can some one out there

...front passenger door is jammed shut. All the locks unlock besides that one. can't open the door. Mechanic said they must break panel from inside. How can I get the door to open without breaking it ...

Question about 2000 MPV

1 Answer

door is the reason for no cool air in the front as for the blower if you mean in does not work at all on 1,2,3 that is a blower control resistor. the resistor is easy cheap fix , the blend door well .

front passenger door window on mazda mpv will not go up Does it make any noise when you use the switch like cracking noise if you do replace window r regulator

...front only? That is usually a blend door problem. One of the doors is stuck in the cold position only. Happens a lot after a battery disconnect. Replace the rear blend door and that should solve your ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Mazda MPV
2000 Mazda MPV

692 Questions

2001 Mazda MPV
2001 Mazda MPV

458 Questions

2003 Mazda MPV
2003 Mazda MPV

413 Questions

2004 Mazda MPV
2004 Mazda MPV

309 Questions

2002 Mazda MPV
2002 Mazda MPV

262 Questions

Manuals & User Guides

Loading...