move to the centre, so I cannot access the print cartridges. I had the same problem with my printer. There is a switch that tells the printer that the cover is open or closed. Unplug the printer. Open
Question about imageCLASS D880 All-In-One Laser Printer
Canon D780 ADF will not feed properly. When I put a document in the ADF it feeds about 2 inches and then will not feed further. This makes it impossible to send a fax. replace the feed tire assy
Question about PIXMA MP150 All-In-One InkJet Printer
...the black front side move a bit and the front side will come loose 6. now you have access to the screws on the front side that hold the side panels, unscrew these. presto finished can not ...
Question about PIXMA MP150 All-In-One InkJet Printer
...2 registration rollers going into the duplex assembly Check the duplex motor that feeds the reg roller shaft - in the front of the duplex unit. I found one that was loose, when I opened the front ...
...front or back some rubber rollers that feed the paper into the machine. These are much like tires in that they need thread to move the paper - if they're worn out, they need replacing - if they ...
...to activate the head motion. One pad was about 1/2 inch by 1/2 inch and a second was a narrow 3/32 x 1/2 inch pad both about 1/16 thick. I removed these pads and the printer returned to
...move on to the ink pad.About 1 inch, towards the front of the printer from that piece of plastic, is a small square, about 1/2 inch per side, that is a small foam pad. This is where the excess ink is ...
move on to the ink pad. About 1 inch, towards the front of the printer from that piece of plastic, is a small square, about 1/2 inch per side, that is a small foam pad. This is where the excess ink is
move on to the ink pad. About 1 inch, towards the front of the printer from that piece of plastic, is a small square, about 1/2 inch per side, that is a small foam pad. This is where the excess ink is
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions