Questions & Answers for: Jura Capresso Impressa front tire move back 2

...back up/ Move it gently up. That's what I did on a similar model. I tried to turn it off and on, reach in and flip the do-thingy, etc.  The only thing that solved it for me was following ...

...front curved planel. 8) Inside the sliding dispenser is a white plastic piece that connected to the piping released in step 5. There is a small plastic catch that needs to be pressed while pulling ...

...move toward you will feel a flat area about an inch wide (measuring front to back). Just back of this (away from yourself), you'll feel a crack about 3/8" to 1/2" wide. Push your fingers up into this ...

...back if there really skanky!. If the machine keeps saying EMPTY GROUNDS even though you have, pull out the tray, look just inside the aparture where the tray goes top right at the front there is a ...

...move grounds through after brewing. The tray seems to be locked in. Your brew unit is probably dirty and needs cleaning. However, it won`t always help just running the cleaning program. Try to clean ...

front, there are for "rivet" looking fasteners on the back. Thanks a Million in a advance! You must remove the 4 oval screws on the back panel, then lift up the top panel. Then take a good grip in the

Cannot get tray to go back in after emptying grounds Unplug machine, wait a minute or so, plug back in while pushing the tray in as far as possible. It makes some noise as it resets and moves parts ...

...move off of it, how do we get it to make coffee instead of heating up for an hour? Probably an internal Element has gone open circuit. Mine did the same thing. Then it wouldn't heat at all. I pulled ...

...back so that the tray sticks out 1/2 inch (so machine does not work) I had the same issue. Had to send mine in for repair. Cost $235.00. Nothing I did would fix the issue. They said there was a major ...