...fuel cap isn't venting properly. The tiny sintered bronze pellet cast into the center of the fuel cap is plugged, allow a vacuum to form in the tank as the engine runs, finally starving the engine. ...
Question about P3314 14" Gas Chain Saw 2.0 Cuin 33CC 2 Cycl
fuel cap vent When saw is running fuel is squirting out of the vent hole on the fuel cap. Saw continue to runs but fuel continues to come out of vent hole. The fuel cap has a rubber check valve in the
...fuel cap missing the hold down that keeps it from falling out of the tank.if the keeper is missing from fuel cap, the valve goes in the cap.if the cap is together then it just sticks in the fuel tank ...
...fuel cap didn't have to deal with the ethanol added to most fuels today. My Pioneer fuel cap swelled when I put her away wet, now I grunt a little removing it. A new fuel cap may only solve this ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
fuel cap for my Poulan Wild Thing Chain Saw- Model# P4018WTL. I live in Huntingdon Valley, PA 19006 (CLOSE TO Southampton, PA 18966.) Please let me know where I can get this cap and pricing too if you
...fuel cap and started priming. Saw that fuel now is passing, closed fuel cap, it started but died. Saw the primer bulb was empty. I layed the chainsaw on it's side, primed, and it started and ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...in primer Replaced fuel line to tank. No problems before. No fuel in primer unless I lay chainsaw on side with filler cap up. Possible filler cap bad? did you forget to install the filter on the
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...fuel cap and replae it ,little help on why? fuel cap venting or what? yes there is a vent some have a little valve on the back of the cap some have a second fuel line with the valve on it look for it ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
...the fuel cap up have a small hole in the cap to let air in the tank as the fuel is pumped out. If air won't go in the fuel can't come out. Some saws have a vent hose with a filter that can plug
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
fuel cap is on the top of the saw try running it with cap slightly loose. This will allow air come into the fuel tank. I have also seen vent holes in the fuel cap get plugged with saw dust. If this is
Usually answered in minutes!
583 Questions
457 Questions
255 Questions