Questions & Answers for: fuel to lean

Question about 1989 RGV 250 K

1 Answer

over fueling front cylinder RGV 89 have since replaced reeds with carbon type and leaned out droping the needle on the carb by one slot any ideas guys ? Sometimes changing to carbon reeds is a bad ...

Ad

...Lean fuel Check engine light keeps coming on. Lean fuel reads on computer. What do I do? A lean code can be caused by several different things. The most common, if you are getting a lean code on BOTH ...

Ad

fuel P0171-System too lean{bank1} P0174 System too lean{bank2} drive cycle P0313 - Misfire Detected with Low Fuel P0174 -System too Lean (Bank 2). P0171 -System too Lean (Bank 1). P0171 and P0174 mean

Question about 2000 3 Series

2 Answers

...lean fuel condition may exist if the engine is sucking in too much air and/or the fuel system is not delivering enough fuel. If bad enough, a lean fuel condition may cause lean misfire, a rough idle, ...

Question about 1997 Neon

1 Answer

...Fuel System Lean (Bank 1) The "lean condition" code is set when the long-term fuel trim value reaches a certain setpoint, +14% if I remember right. Whatever is going on, the PCM thinks the car is ...

Question about 2008 Entourage

1 Answer

lean condition. Additional fuel is indicated by fuel trim values that are above 0%. The PCM will reduce fuel when the HO2S signal is indicating a rich condition. Reduction in fuel is indicated by fuel

fuel.A lean condition could be present during high fuel demand due to a fuel pump that does not pump enough fuel.Review the Failure Records with a scan tool. If an intermittent condition is suspected,

...fuel too lean in bank 1. WHY? i have replaced all of the spark plugs and coil packs and i am still having a misfire on 1 and 7 and fuel to lean. whats my next step? could it be fuel injector, ...

Question about 2003 Malibu

1 Answer

Fuel Trim too Lean (Bank 2) fuel trim is system to modify injector pulse if system go lean it will go rich when the system is too much lean and is max.rich it code look for 02 sensor bank 1 and 2 data

...fuel. • A lean condition could be present during high fuel demand. • A malfunctioning MAF sensor can cause this DTC to set. Refer to DTC P0101 . • Review the Failure Records with a scan. If an ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...