Questions & Answers for: fuel mix Garden

...fuel mix is 25:1 but most homelites run a mix of 32:1 either one should be ok FUELING AND REFUELING THE TRIMMER FUEL MIXTURE This product is powered by a 2-cycle engine and requires pre-mixing ...

...mix of 45 to 1... ( 2.8 oz oil to 1 gal of fuel ) I also add about 1/2 oz of "Stabil" fuel stabilizer to the mix (holds down gumming of the fuel and keeps things running sweet)...hope this helps... ...

mix 50:1 in fuel can and skip the auto mix. I think you have missed the mark with this answer. The fuel is not automatically mixed, it is always pre-mixed. The bar auto lube pumps out way too much bar

...Mix gasoline and oil at a ratio of 40:1 (A 40:1 ratio is obtained by mixing 3.2 ounces of oil with 1 gallon of unleaded gasoline). DO NOT use automotive oil or boat oil. These oils will cause engine ...

mix it with your fuel.  You can find mixing oil at PartsBuggy.com. 50:1, 89 octane not to exceed 10% ethanol. https://www.echo-usa.com/getattachment/289a7c10-eeab-41f9-a02a-8e680d5a65ec/ES210es05

...mix any fuel and oil for the crankcase. If it is a 2-stroke engine, the fuel and 2-stroke oil will need to be mixed before entering the cylinder. Some engines have an automatic mixing setup - those ...

1 mix,and fill it up That the very reasoning is why I get so many units in with struck rings and heavy carbon buildup. 3.2 oz of 2 cycle fuel oil is 40 to 1 mix. A 25 to 1 mix requires 5.12 oz. of oil

...fuel mix remains as fresh as possible. Nothing creates bad starting problems more than stale fuel mix. Small engines have small fuel passages and the fuel and the refuelling process must be ...

fuel mix does a promac 2335j use? 2cycle fuel mix is a function of the oil used, not the engine the fuel mix is used in. Pick a 2cycle oil and mix it according to what the oil says. This is what I use

fuel mix screw adjustments ok, i got the bike running pretty well, but i want to properly adjust the fuel mixture screw. on this bike, the VM26ss carbs have both a air mix and a fuel mix screw. i want