Questions & Answers for: Chevrolet Tahoe fuel pressure regulator

...fuel pressure regulator 98 Tahoe the Tahoe is not starting without putting starting fluid in the carburator. baought a fuel pressure regulator to replace the old one, but can't find where to attach ...

Ad

...FUEL PRESSURE REGULATOR? DOES IT HAVE VACUME LINES GOING TO THE FUEL PRESSURE REGULATOR THAT COULD BE TORN OR CRACKED? Your Tahoe does have a vacuum line connection to the regulator. It's also ...

Ad

fuel pressure where is the fuel pressure regulator on 97 chevy tahoe 5 7 problem: If you look at the top of the upper intake manifold plenum with the air intake duct work off you will see 2 shiny fuel

...fuel pressure spec for a 2004 tahoe with 5.3 flex fuel. I have low power. Changed fuel filter, air filter and oil and still no power. Checked fuel pressure and had about 43 psi. not sure what spec is ...

...is a fuel injection pressure regulator on a 1999 chevrolet where is a fuel injection pressure regulator on a 1999 Chevrolet tahoe 5.7 liter should be on the end of the fuel rail or under the ...

Question about 1999 Tahoe

1 Answer

...fuel pressure regulators and fuel rails will be used in this model year. Each regulator has a different "footprint" that consequently changes the size of the receiving port in the fuel rail. The ...

Question about 1998 Tahoe

1 Answer

Fuel Pressure Regulator - REMOVAL & INSTALLATION (see Figure 1) Disconnect the negative battery cable. Relieve fuel system pressure. Disconnect the ignition coil. Remove the upper intake manifold.

...fuel pressure regulator and the map sensor and if you see any fuel run out of either of them then replace the regulator.  Your fuel pressure regulator remove the hose that is attatchede to ...

...fuel pressure regulator making alot of noise. it is a new regulator. the engine is stalling. could this be the cause if the stalling Yes it could be the cause. Make sure you have a good engine vacuum ...

Fuel pressure at 58. I'm stumped I think that fuel pressure may be too high - the injectors work over a vary narrow pressure range. The regulator output may be blocked, or the pressure may just be too

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...