Questions & Answers for: fuse powers power mirrors 2002

...power mirrors also don't work. Everything else seems to work fine. sounds like a bad fuse, have a look at your manual and see which fuse controls those parts, they are most likely on the same fuse, ...

...fuse box Part of the fuses under the dash have no power. Specifically, the radio and heated mirrors are two of the circuits. Any idea what relay might feed these circuits? check your fuse box under ...

passenger window wont roll up or down , power mirrors go left and down on both sides on 2002 ford windstar van bad window motor ,or bad cables on window motor check for power too the moter first

power locks do not work for my ford windstar 2002 can it be the fuse and if yes where is the fuse located? check fuse 37, a 20 amp yellow fuse in the interior fuse box, if that checks ok the problem ...

...All 4 power windows,radio and power mirrors have stoped working at the same time i checked all the fuses and relays out of options and dont know where else to look. check for a good ground ...

...fuse and relay and neither fixed problem. Check for power at the power mirror switch. If you have power ,it is probably the switch. If you are asking about the turn signals it is probably the bulbs. ...

...2002 WINDSTAR, IT DOESN'T HAS POWER IN THE WINDOWS, MIRROR, RADIO AND OTHERS. THANKS.TOM Front electronics module FEM bad. Replace with identical used one or dealer will have to install a new one and ...

POWER ON FUSE BOX FOR RADIO WINDOWS POWER MIRROR FUSES. Thats not good because then you have to trace the problem out from the back side. Possible scenarios include but are not limited by: 1. The fuse

2002 ford fuse box diagram.Click the link below:--- http://howtobyme.blogspot.com/2011/10/fuse-box-diagram-for-2002-ford-windstar.html -------- This will help.Thanks.Helpmech. On this website you find

POWER MIRRORS DON'T WORK AT ALL ANY FUSE ON 2002 FORF RANGER Check to see if the mirrors share a fuse with another circuit, if fuse is good, check for 12v at the mirror, if no voltage check for 12v ...