Questions & Answers for: fuser door

...door below the fuser unit. Lift the fuser unit using the handles front and rear sides. (be careful it is very hot). Set the fuser unit on a table or counter or desk. Look carefully at the left side, ...

fuser door open printer not working what is fuser door open printer not working what is fuser door Back of the printer -

...fuser door open error getting "fuser door open" message. opened and reclosed fuser door to make sure fuser door was closed. restarted printer. still get same message. what can i do next? There is a ...

fuser door is stating it is open when it is closed I have turned off and taken out fuser turned on and then replaced. still showing fuser door is open will not print or copy That is a problem with the

...the back. Drop the back door down and then press on the left side where the door pivots. Slip the door out and you will see 2 blue handles on the fuser, squeeze these while pulling out on the

fuser door is closed. I want to fix the problem that is causing the "fuser door open" error message. Thanks! Adam Look at the fuser door -- there is a "finger" that sticks out, and connects,

fuser door open" what is "fuser door open" Fuser Door Open is the message on the display when it's powered on. I took the back apart, removed the fuser, looked all over. I couldn&

...door 03: Open the fuser cover 04: Remove the fuser 05: Remove the new fuser from the packaging 06: Insert the fuser 07: Close the fuser cover 08: Attach the top rear door 09: Lift the paper bail, and ...

door sensors, and removed and replaced the fuser again. No success. Have noticed that there is a crack in the fuser cam shaft. Any help will be gratefully received! Reinstall software. You do not have

fuser door open? how do i close fuser door? Try fuser door should be in the back. If it is close, it could be a door sensor issue. Also make sure that the fuser is in correctly.