Questions & Answers for: gas connector

when upluged from 110 volt the refrig does not automatically go to gas and work I checked the 12 volt connection and cleaned the electrical connectors. When I restarted the refri for gas I could then ...

...gas line valve flare fitting. The connector should hook directly up to the gas line valve without an adapter. The adapter will come with the connector and that goes on the pipe thread connection at ...

connector only hard gas pipe..also gas line should be properly sized to make sure there is enough volume of gas to the unit. Most unit fire at 199,000 btu and if your gas meter is more than 20 ft away

...gas cap to relieve any pressure in system. Twist the connector 1/4 turn in either direction to loosen any debris. Squeeze the plastic tabs on the end of the connector and pull the connector apart. ...

gas, im sure its the sending unit but not sure how to start working on it, im a newbie in the machanics relm. HELP? The fuel level gage sending unit is defective, very common problem. The sending unit

...disconnected and ran fuel out of line. Line snapped back in place. does the connector need to be replaced? Yes, the gas line connector needs to be replaced. This is probably why it came

...Connector (5) Exhaust Gas Recirculation (EGR) Valve (6) Fuel Injector 6 (7) Ignition Coil 2Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and ...

...connector in the gas tank that has I guess fell off the end of it. Do I need to put the connector back in the end so it doesn't fall out or does the connector not only connect to the fuel line but ...

...quick connect connection and they won't connect page 9 .have a licensed plumber hook up gas line and quick connector. the female quick connector is on gas supply and male fitting is hooked to