Questions & Answers for: ge jtp15 light cover

GE Model JTP15 oven shows F3 error code The oven heats for about 15 to 30 minutes and shut off showing an F3 error code. This has happened at several temp settings. I have replaced the temp sensor ...

JTP15 GE Oven - vibration noise My oven has begun making a vibration noise when the fan comes on. How do I check the fan or change it so it stops the vibration? We have a double ge wall oven. The vent

GE model JTP15 single wall oven, when I press "bake," the broiler element comes on instead. does the bake element come on at all? if so, try the oven out. do a bake @ 350 allow it to pre-heat, and see

GE JTP15 oven all other functions still work Mine did the same thing twice. There is a high temp safety switch on the back of the cabinet. Every time my wife runs the self clean cycle, the switch goes

ge oven JTP15 beeping and flashine F7 error I have a GE electric oven model number JTP15 and ti works fine most of the time but after a while it will start beeping and flashing F7 code (this is while ...

Our JTP15 beeps and displays F7 is there a reset for it? Yes, you will need to press the stop/cancel button, this will clear the error code and the display. The stop/cancel button will stop the error ...

GE Built-In Electric Oven Model# JTP15 BW2 BB that quit working while back flashing F5. I replaced the Oven sensor assembly since then, but that has not helped. It now flashes F2 randomnly. I replaced

GE JTP15. It was working and then just shut-off. Then the error code appeared. I removed power for 30 minutes but the oven control did not reset. F0 Stuck touch pad Usually means that either the touch

jtp15 GE oven? The cleaning element fried itself, blithe earl burned from one end to the other. How does the element get removed? Hello & Welcome to FixYa Please review this video if you are doing

GE jtp15 wall oven, wired it 220 red/white/black. It turned on, locked door flashing, 4:00 flashing, then shut off and will not turn back on. Strange it won't turn back on. Did you see it working when