Questions & Answers for: gears shift park reverse car

...gear the cable that goes from the shifter to the transmition could have broke or came loose. If that happened while driving the gears may have tried to shift when tension was released from the

...Park and you can slide the gearshift into any position and nothing happens? This sounds like one end or the other of your shift mechanism came loose. Unless you see a puddle of trans fluid on the ...

...gears. if it moves good you'll need to look at the other end of the cable on top of the trnasmaission under the master cyclinder under the hood, This arem can fail as can the end of the cable and ...

...you mean automatic ******) is check if it will roll freely in Neutral but not roll freely in Park? It could be that the shift cable connecting your shifter to the ****** is broken or

shift cable connects. pushing it toward the driver side of the car will put it in park. And if you count the number of clicks from park you can change gears. For example: 1 click from park is Reverse,

shift into first it was locked out, I tried all gears but would not go I checked all the cabbles clutch fould was low and black I put more fluid in still nothing i messed with the transmission shifter

...gears.You could securely jack a rear wheel off the ground and disconnect the trans linkage.  Have an assistant operate the gearshift and see if it makes sense and if it is binding.  If the ...

...shift gears on Manual transmission? http://technoanswers.blogspot.com/2012/01/hard-to-shift-gears-on-manual.html -------- Car hard shift at slow speeds? ...

park it, gearshift just moved all over the place, wouldn't "lock in" and wasn't moving the truck into any other gear. I was able to put on parking brake and shut off engine, but now it won&#39

...park and turned it back on, gears shifted but went out just like the first time, once I got home I replaced the tranny fluid and it ran good for the most part, drove it today and it went out once ...