...steering shaft. Not a safety issue according to GM. The shaft has to be removed and lubed using a kit and procedure from GM. Not a big deal to do but there are some precautions that need to be taken ...
...GM MUST BE AWARE OF THE STEERING PROBLEMS BECAUSE FROM WHAT I'VE GATHERED THEY HAVE THESE SAME COMPLAINT ON ELECTRONIC STEERING SINCE 2004. COMPLAINTS HAVE BEEN TURNED INTO THE NATIONAL HIGHWAY ...
...steering column. Their are no serviceable parts on this column. I work at a gm dealership and have had to replace many of these columns due to issues. The column itself is around 800 dollars, and ...
...steering shaft will slide out of the mast jacket when the snapring is removed. Remove the GM Lock Plate Compressor tool No. J-23653 or equivalent, and the lock plate. Remove the multi-function ...
...2 of the 4 bolts in order to make the steering column as tight as it should be. It's not necessary or possible to reach all 4, believe it or not. That's the way GM steering columns are, I
...Deville. This one is not from an 89 Eldorado, but all GM Tilt/telescoping steering columns from that time are virtually identical: ...
you don't want to tackle taking the column apart and trying to piece it back together, just find a used steering column assembly. It's a very common problem on GM cars and trucks between 1975 and 1997
Question about 1985 S-10
...a rod Some GM cars have a switch/lock in the steering column that moves a rod that goes down the column to the actual electrical switch at the bottom of the column on its top. This part is
...GM models use the same steering column until the late1990's. So please follow the instructions with pictures at the link below. I assume you have a tilt column. Body Loose Tilt Steering Column Repair ...
Question about 1985 S-10
...GM Steering Column Anti-Rotation Pin J-42640: Steering Column Tools" Amazon Search for: GM Steering Column Anti-Rotation Pin J-42640 ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions