Questions & Answers for: goes on 2 cylinder when its cold

Question about 1999 Expedition

2 Answers

...2. I changed plug and coil and it has improved but still misfiring. It shakes whenever I have foot on gas and hesitates and also a faint smell of fuel. I am unsure what to move onto next oh and I ran ...

Ad

Question about CH25 PA-CH730-0040 Command Gasoline Engine

1 Answer

goes into the engine.....regulating that cylinder's connection to the arm can solve this problem.. -regulating procedure:::--- unscrew the nut that keeps the two connected...then. 1- if by (runs like

Ad

Question about 'Yard Broom' Leaf Blower

1 Answer

...2 turn Chain Saws: 5) check impulse tube and intake boot for cracks or leaks *if all of the above are OK and/or do not improve performance then: Remove Carburetor 6) replace gaskets/diaphragms a) use ...

Question about Inc. 25.4 CC Backpack Blower

1 Answer

...2 turn Chain Saws: 5) check impulse tube and intake boot for cracks or leaks *if all of the above are OK and/or do not improve performance then: Remove Carburetor 6) replace gaskets/diaphragms a) use ...

...2.5 liter Hard starting when cold ( engine cranks normally ) sometimes the check engine light comes on, sometimes it does not. after it starts and I turn it off, it will start right up no problem and ...

Question about 2002 Z3

1 Answer

...goes off and stays off 3 or 4 days. I used my peake tool to check some codes this is what I found 07- Engine Coolant temperature, radiator outlet 3E- Misfire random, unknown cylinder 33-Misfire ...

Question about 1996 Rodeo

1 Answer

...the coil pack with another cylinder, and see if the misfire goes from #2 to the cylinder you put it on. If the misfire continues to be on #2, then consider changing the sparkplugs. I hope this

...2 side is smoking quite excessively but smells like fuel....the smoke is white.... any answers are apreciated. Those compression figures are super low. I'm surprised the bike is running at all. That ...

...glow plugs are worn try turning the ignition on and off each time light goes out 2 or 3 times to get more heat on the plugs then start ! if this doesnt work then glow plus and system needs checking

...goes up normally to working temp had misfire on cylinder 2 injector replaced no change Was thinking would a sticking hydraulic lifter give this problem problem hydraulic lifters will maintain a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...