Questions & Answers for: half shaft


...Half of the shaft is in the knob, the other half is imbeded in the rheostat temperature control assembly which is factory soldered to the circuit board. The only thing I can think to do short of ...


Question about 1987 Celica

1 Answer

...half shaft the right side half shaft has come loose from the transmission, help! pull wheel, remove nut on half shaft, calaber, brakes, roader, tie rod, lower control arm, pop out half shaft from ...


...half shaft's bearings on both ends. first remove the differential half shafts and drive shaft, remove rear cap, loose the bolts on each end bearing,remove the differential assy. then replace ...

Question about 1991 Cherokee Limited

1 Answer

...what has to be removed to replace the passenger side cv half shaft? you have to remove all this untill you get to #18(half shaft) then you pull the half shaft out, reverse the order to

...half half shaft assmeby very cheap, the right and left are a different part number u don't give that info. also all wheel drive is different part # as well THE MAKER OF THESE PARTS AND (ALL ARE STILL ...

half shaft replacement 2000 silverado k2500 Remove the universals and drop old shaft. The important part it to make sure that the half shaft is indexed properly (put in place properly) spec is ...

Question about 1990 K2500

1 Answer

...half shaft or not Hello ghansen31: My name is Roger and I will help you. Yes the front axle shafts are called half shafts.The left half shaft would be the driver side shaft. You should be able to buy ...

...half shaft and cv axle shaft? i wanna get my truck axle shaft fix but i came accross this when i went shopping for the axle. they have a cv half shaft and cv axle shaft. I dont know if they are the ...

...half shaft out on the side the seal is leaking then pop out the seal and install new seal. this means r&r the wheel, brake, separate the lower ball joint, remove the half shaft axle nut, remove ...

...Half Shaft is totally isolated from the Gear oil in the trani, back in '06. The half shaft should bolt to the Trani Stub with 6 (or8) allen keyed bolts. If I had to guess, I think the mechanic may ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Ovens Experts


Level 3 Expert

85223 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Brad Brown

Level 3 Expert

18165 Answers

Are you an Ovens Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides