Questions & Answers for: Kodak EasyShare half shaft

...half ago. Check the Kodak website Tech support, It does seem that there is a switch fault or internal short here. A friend of mine had the same problem. If the lens cylinder is not just right this ...

...shaft seperate from Kodak, Thanks eppelr, I now have two working plus 3's. If anyone wants pics etc please get in touch Yep. That is the problem. That little white piece is broken. I took the unit ...

...shaft. It's a very strong force-fit. Too bad this site doesn't support pictures, which I took to illustrate the procedure. You have answered questions regarding people who have photo printers. The ...

half is a sharp line, a wire to the print head may be broken or disconnected. If the boundary is irregular (wanders up and down an 1/8 inch or so), the problem is most likely a broken plastic lever on

...half of the photo- it cuts off the top portion. I recently replaced the cartridge, but it has not corrected the problem. The problem is most likely a broken plastic lever on the end of the shaft that ...

ONLY PRINTS HALF THE PICTURE LEFT HALF A small Plastic Peace on the shaft was broken. I super glued it back works Great.

...half of picture' problem then.. SOLVED!! eppelr is correct, the small white cam on the right hand side at the top (internally) cracks and this allows it to come loose on its shaft and stops it from ...

...half of the picture. SOLVED!! eppelr is correct, the small white cam on the right hand side at the top (internally) cracks and this allows it to come loose on its shaft and stops it from pressing the ...