Questions & Answers for: hall sensor

Ad

Question about WM-2277HW Front Load Washer

1 Answer

...hall sensor I saw your post about replacing the hall sensor. How do you open the top cover of the washer? I've tried unscrewing several screws and wiggling the top around but it won't budge. How did ...

Ad

Question about 4.0 Cu. Ft. 7-Cycle Front-Load Washer - White

1 Answer

...hall sensor on the motor. It is possible that one of the connectors has come loose (this is an issue with LG's or it could be the hall sensor it's self is bad. First check that the harness that ...

Ad

Question about WM-2277HW Front Load Washer

2 Answers

hall sensor my LG WM2277H needs a new hall sensor. The repairman says that when replacing the sensor you have to replace the motor too. Does that sound reasonable or not? No. Actually, the Hall sensor

Question about WM-2277HW Front Load Washer

1 Answer

...Hall Sensor fault. The Error code (E3) Is issued when the Motor control board is attempting to drive the motor (during the spin out), but is not seeing any tachometer response readings. The Hall ...

Question about 2005 Sonata

1 Answer

...Hall) sensor signal circuit is open or shorted to ground.CMP (Hall) sensor ground circuit is open.CMP (Hall) sensor power circuit is open (check fuse in the I/P).CMP (Hall) sensor is damaged or has ...

Question about 2005 Sonata

1 Answer

...Hall Sensor. I am not used to this appliance as I am from the UK however: As hall sensors are used on direct drive machines the hall sensor is located on the back of the drum underneath the big round ...

Question about WM2101HW 4.0 cu.ft. Washer

1 Answer

...hall sensor A hall sensor is a magnetic pickup sensor that picks up magnetic pulses caused by a rotor that is bolted to the spinner shaft in back of unit. remove back access panel and motor rotor is ...

Question about wm2501hva front load steam washer 4.2 cu. ft. factory refurbished

1 Answer

...Hall sensor Replaced stator (2nd hall sensor included then no power whatsoever - replaced main board Still no power - replaced line filter, now there is power, but washer will not spin. Stutters ...

hall effect sensor and a security hall effect sensor. The tamper hall effect sensor is mounted on top of the security hall effect sensor. Should someone attempt to defeat the system by use of magnetic

Question about wm2501hva front load steam washer 4.2 cu. ft. factory refurbished

1 Answer

...hall sensor G40(Camshaft position sensor) Hall sensor function A hall effect sensor is a sensor that produces a square wave output that can be directly read and modulated by the ECM (as opposed to an ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...