Questions & Answers for: Mercedes-Benz C-Class handle release

release the belt tension. To remove the belt turn the bolt by slipping a 4' pipe over the socket wrench handle. Use a wrench as a lever to slide out the belt. Put the new belt last on the idler pulley

...release handle broke or cable is broken it is probably out of adjustment. Try having someone lean into the seat backrest and then pull release handle. I'm assuming your talking about your backrest ...

...to my bbot if not than you will have to release panel as '' string'' may have broke or come up dislodged by the way when doing manually try the handle on the outside as the same time to release ...

...release handle, behind inside grip hande (as circled in photo), then slide & lift the interior door panel away slightly as one assembly, just enough to reveal any electrical wires. Disconnect all ...

...release handle and get a freind to slap their hand hard on the bonnet in the rough area of the bonnet catch it should pop open when you do get it open check the operation of the catch with the bonnet ...

...handle to release the seat, and once done if you have room there should be a cord, or pull handle in the trunk to pop it open. Most cars have these now so if someone throws you in the trunk you can ...

Good day, I drive a C200 , year 2005 model. Due to safety procedures the cars of staff members are randomly search on entry to our parking arcade. On more than one occasion the security official ...

...release handle won't pop the hood My car was in the shop and when they closed the hood it didn't close all the way, now the pull inside the car wont "pop" the hood to open and ...

...be able to use the mechanical key that is located on the side of your remote key fob. It slide out. Then insert it into the lock under the rear lip of the truck near the release handle. Hope this ...