...HD tv unless it ''warms up'' for about 25 minutes. Tv will turn on and volume will work, but other functions only work after 25 minutes. Remote has been programmed several times but doesn't seem to ...
Question about 42HP83 42 in. HD-Ready Plasma Television
attempting to turn on TV, but I don't know how to re-set the remote. ( cable went out today- its back on now) if you know the code you select the object TV1 and SET Btns light comes on the remote, ...
Question about ViP622 DVR DTV Receiver / 180-Hours Video Recorder
...hd channels on tv1 and on tv 2 it says looking for satelite both have identical hook ups off dish same everything You may have a bad port on the back of the receiver, a cut or disconnected wire ...
Question about DVR-625 DTV Receiver / 100-Hours Video Recorder
...HD receivers allow for TV1 to show in standard and high definition. On the TV2 it will show in SD format only, even if the TV is a HDTV. We do have System Wizard and you will need to be in front of ...
...hd Thank you in advance Hi this is Luke. Here's how: 1. Put receiver on single mode. 2. Use RCA cable on tv2 out chan 21 - 69 out as output from back of vip222k. 3. Plug the other end of RCA to Video ...
...hd receiver. It has 2 tuners. If I run tv1 or tv2 by themselves the receiver and remote work fine. But if tv1 is on, the remote for tv2 won't work. It's like you can't use both tv's at the same time. ...
Question about ViP722 DTV Receiver / 350-Hours Video Recorder
...TV1. How should it be set up to record a HD PPV and be able to go to a live channel (like the local news)? This is a problem that many have. If you are recording on TV1, and the receiver is in dual ...
...if this is an HD set up your probably using the component cables. If you look on the back of the receiver all of the cables RCA or component should be connected directly under the green TV1
HD? What is the model number on the receiver in the home? You should see the model number on the front bottom left of the receiver. I will provide you our link for connection with an RCA cable: http:/
HD Decoder must be set up to "listen" for the correct mode. You can do this in DStv Central. • Press the DStv button • Go to "Settings" • Select System Settings • Select Remote Control • If the remote
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
