Questions & Answers for: Chrysler Sebring headlight low beam

...bulbs For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall. Welcome there are two torx screws on each headlamp look right behind adjust as

Ad

Headlight low beans don't work. High beams do 2001 Town and Country - Headlight low beans don't work. High beams do work. Worked fine yesterday, this morning they don't work. Light comes on in dash ...

Ad

Question about 2004 Sebring

2 Answers

that way. Shame on Chrysler for making it so difficult, in my opinion. But I hope this helps you to change the bulb =) YOU HAVE TO REMOVE HEADLIGHT HOUSING TO REPLACE HIGH BEAM OR LOW BEAM LIGHT BULBS

Question about 1998 Sebring

1 Answer

...low beam on the headlights of my 1998 Chrysler Sebring do not work but the high beams do. Is the problem a bulb or fuse and how do I replace the part? it is most likely a blown fuse as the HIGH & ...

then there is a break in the wiring leading to the headlight, and the wiring will need to be replaced. also check to see if you have a relay for the low beams in fuse and relay box, check this first

low beam headlight is not working, replaced with new light bulb but it still doesn't work The passenger side low beam headlight is not working, replaced with new light bulb but it still doesn&

...headlight relay on my 2004 chryler sebring headlights dont work have to hold high beam with hand to keep them on There is a relay in the fuse box in the engine compartment, but it would handle both ...

...headlight relay is on car. If low beams are working then the relay is fine. Sounds like the dimmer switch is bad. Lift the handle to flash the lights. holding it up they stay on high. Push the handle ...

...headlight (low beams driver side) still will not work. Changed the fuse and then bought brand new headlight assembly, installed and still low beam will not work. What else could be wrong? The high ...

Question about 2007 Sebring Sedan

1 Answer

...headlight, at first the lights still worked, then bulb busted for the low beams. Changed bulb and it worked fine for a while then busted again. When bulb was changed last time did not work. Tried ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...