Questions & Answers for: Plymouth Grand Voyager heating vents

Ad

Question about 1999 Grand Voyager

2 Answers

...heating and cooling vents have a foul oder i need to know how to access the heater core to be cleaned thanks. try ur ac in dash filter ive had that problem b4 but ur core is under the hood pass side ...

Ad

I've got a 1997 Plymouth Grand Voyager Rallye SE. The heat for the back air vents turns on but never gets warm. It constantly stays cold (or whatever the outside temperature is) and on the flip slide ...

Ad

Question about 1998 Grand Voyager

1 Answer

heater not working This sounds like the blend door actuator. This is a little door in the vent box down under the passenger side dash that opens and closes to change the vent temperature from heat to ...

Question about 1998 Grand Voyager

1 Answer

I let my van warm up for about 10 mins. or so, and the gauge reads half heat. But there is no heat coming out of the vents. I noticed that the top rad hose was rock solid when I tried to squeeze it. ...

Question about 1998 Grand Voyager

1 Answer

No heat coming through the vent,just cold air,,fluid level is up,,could the switch be stuck? could very well be ,either the operating flap on the heater or the water control valve if it has one which ...

i have a 98 ply grand voyager, and have heat from the drivers side vents, but cold air from the passenger side vents? please help Does your van have seperate controls for driver and passenger ...

Heat is coming out of the passenger side middle seat floor vents when the a/c is on with the rear reostat switched on. Does anyone know what could be the problem? I do get heat out of the heater vents

I bought a 1996 Plymouth Grand Voyager and have discovered that heat is not get into the defroster vents or air vents. I have had the heater coil checked, the hoses checked and the fluids checked and ...

The motor switch on my 1996 Plymouth Grand Voyager is bad. Is there a way that I can manually switch the vent from air to heat under the dash without having it taken off? You might be able to remove ...

already changed the thermostat changed the vacuum value still no heat why Hi Brenda,could be your blend door is not opening when you turn to hot or the heater core is bad,check floor board on driver ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...