Questions & Answers for: Symbol hex file

hex file to reload on to it. There are two commands that you may want to try on the terminal but i doubt you will be able to modify the file. flshctl /w will enable you to write on the flash. flshctl

...HEX file. Where can I find/get a HEX file for the PDT6846 to connect it to the Wavelink Studio COM Server? you can get it from www.wavelink.com they are quite good and still offer the files for the ...

...hex After loading the LWP file I get a Command or filename not found after my PDT6842 boots up. So I then load the UPD file and get the same. Is this a normal screen to get? Am I on the right path in ...

hex file to PDT. It worked but after time PDT has blocked. Cold and warm boot doesn't work. Is there any chance to fix it without special support? Thank you Probably not -- looks like corrupt firmware

...to cingifure, i need to know how Hello, The PDT6840 has 3 files loaded into it at any one time LWP.HEX, UDP.HEX and an application. SLOADI comes up on the screen during boot. You may require ...

PDT 6846 Hex Image Modify Query Hi, I wondered if it would be possible to provide some pointers to the query below. It?s relating to Handheld devices that were purchased and configured many years ago

file name not reconized Hello, I've seen this fault many many times. Its either a software fault which can be remedied by reloaded the software lwp.hex, udp.hex and the application or a hardware fault

...HEX file is loaded into the terminal. In the future when you try clicking Connect in the status bar is written "Fail to open MonitorUSBdnlddevice". Restarting the computer situation is ...

the cradle and enter, its shows intial program loader after that whatever you will press nothing will happening ,plz help. You will need the Hex file for that device and the Motorola USB Download tool

Software PDT6800-NOS64000 Hello, I can't build the .hex files to upload to the terminal PDT6800, the terminal only has 640 Kb in memory, where I get the software needed to fix the problem and put in ...