Questions & Answers for: horn

Ad

Question about 2000 Mountaineer

1 Answer

Horn Wiring 2000 Mercury Mountaineer My son tried to replace his horn (kept blowing fuses) with an aftermarket horn, and I am going to put back in an OEM replacement. The one he got is a piece of junk

Ad

Question about 2003 Expedition

2 Answers

where is the horn relay? The dealer can hook up his diagnostic tool and retrieve the fault code. -------------- SECTION 413-06: Horn 2003 Expedition/Navigator Workshop Manual DESCRIPTION AND OPERATION

Ad

the horn not working dt250, have power to wire at horn . Should a horn sound if connected to a 6 volt battery to test horn? Does the horn have 2 wires or 1? Newer Yamahas have 2 wires....power to the ...

Question about 1974 DT 360

1 Answer

horn does not work, horn buttons are good, horn contact in steering cololm is good, battery level is good, can't find a fuse in fuse box for horn. if you take a test light and test all the fuses ...

for 2004 ford truck f150 extended cab, I found the horn fuse, where is the horn relay? horn fuses keep burning out, thinking it is the horn relay disconnect the horn or horns, operate the horn and see

Question about 1993 Topaz

2 Answers

my horn doesent work my horn quit working WITH KEY ON EVERY THING ELSE OFF PUSH THE HORN YOU SHOULD HEAR A SMALL CLICK THAT THE HORN RELAY IF SO TEST FOR POWER AT THE HORN MAKE SURE IT IS STILL ...

The horn on my 2010 Santa Fe stopped working. Any suggestions or help The horn in my Santa Fe stopped working when pushing on the horn pad you may hear a click noise this tells you the circuit is good

Removed the only wire connected to horn it now is only held and connected to frame by a single bolt. Afraid to wire in air horn because horn still sounds even though it has no wire connected to it. Hi

were is horn relay for sc1 1.9 4 cyl. saturn 1999 horn relay The horn system consists of a single horn, a horn relay located in the underhood fuse block, and driver controlled horn switch in the ...

2004 Ford F-150 the horn just stopped working. Chk'd fuse all OK. Now what? Disconnect the horn wiring at the horn. Check for voltage at the horn when the horn 'button' is pushed. If there is voltage ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...