Questions & Answers for: hot washer

Question about Elite 45986 Front Load Washer

1 Answer

...water line going to washer have hot water?If donot have trace the line from Hot water tank going to washer if yuo rfound it open the valve. hold the pipe you can feel the hotness.attache to

Ad

Question about Estate TAWS750PQ 27-Inch Washer

1 Answer

...washer hot water runs continuously The washer's hot water continues to run even when the machine is off, I had to turn the water valve off to the washer. The Cold cycle works fine and even when I put ...

Ad

Question about Neptune FAV6800AW Top Load Washer

1 Answer

...hot water then setting the washer to just cold wash and then hot washif you get nothing on the cold and cold water when set to hot they are probably reversed. Typically if the auto-temp control is ...

Question about CW5000 Front Load Washer

1 Answer

...washer - Hot water hose is connected to the wrong faucet. Hot water faucet is not turned on. Resolution => Connect hot water hose to hot water faucet and hot inlet on washer. Be sure hot water faucet ...

Question about VBXR1090B Top Load Washer

1 Answer

...washer on the hot wash it will fill up, but only with cold water. is the hot water generated by something in the washing machine or from my house water heater. the water to my sinks, bathtubs and ...

...washer hot/cold now reversed Maytag performa washer hot and cold valves are hooked up correctly, but washer is giving hot water on cold setting and cold water on hot setting. Just happened suddenly ...

Question about Performa PAV2200

1 Answer

...expand. Consequently, as more and hotter water flows through the valve, the washer expands to the point where it constricts the flow of hot water. Replace the washer, at least on the hot water

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...washer. Shut off the hot water, disconnect the hot water hose from the washer, and hold the end in the washer tub. Open the hot water shut off. If now water comes out the problem is in the hose. ...

...hot water coming into the washer. First, I would make sure that you have hot water available at the washer spigots. SLOWLY unscrew the hot water hose at the hot water spigot and see if you have hot ...

Question about Atlantis MAV6000 Top Load Washer

1 Answer

...washer into the hot water inlet port. The inlet port is usually labeled with (H) or (HOT). Verify that the cold water inlet hose is connected to the back of the washer into the cold water inlet port. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...