Questions & Answers for: hull

Ad

will it work through an aluminum hull, i have been getting answers no & yes? Want to know if this will work with an aluminum hull? (.025 thick)Garmin IN Hull m260 transducer none of mine do. dont ...

Ad

Question about Molokini Kayak Cbh57702

1 Answer

crack in clear blue hawaii molokini hull what would you use to repair a crack in the molokini hull? about 6 inches long below the water line. Use a fiberglass repair kit, available at most hardware ...

Ad

Question about 520 5psd Plastic Thru Hull Transducer 600w

1 Answer

My problem is I bought a 600l furuno and it came w/a thru-hull transducer and I wanted a transom mounted trans.I all ready bought a tr/mount and I need to sell the thru/hull.It's the 2" w/speed and ...

Question about 520 5psd Plastic Thru Hull Transducer 600w

1 Answer

does this transducer mount in the floor of the boat,or on the bottom of the hull? Hi! This transducer requires a hole to be drilled in the bottom of the hull and the unit installed from the outside, ...

Question about 520 5psd Plastic Thru Hull Transducer 600w

1 Answer

...installation should the transducer on a Elite 5 be in line with the bottom of an aluminimum hull or the bottom of the ribs running along the hull thanks try and mount the transducer at the ...

Question about Qt206hp Digital Depth Gauge With Adjustable In Hull Transducer

1 Answer

I was told that the Uniden QT-206HP depth sounder will not work thru an alunium hull is this true or false Hi! The transducer for your depth gauge will not work through an aluminum hull. A drilled ...

cavataion with my 800 yamaha waverunner will not get up on plane check hull type as a freshwater hull and a sea hull are different as sea water has a higher level of buoncy .Although i doubt if you ...

Question about X135 Power Pro Sonar Without Transducer

2 Answers

X135 in dash with shoot through hull transducer. It is not reading depth properly. Even when sitting still the depth may be correct but flashing and sometime stall. When running it doesnt read ...

...by improper storage or transport of your kayak, especially if it's hot out. Gently heating your hull (either by laying your kayak upside down in the sun on a warm/hot day or by using a heat gun ...

Question about HDS5x Fishfinders

1 Answer

...will be the least turbulence beneath it. This is easy if your transducer is mounted inside the hull and reads through the hull. Not so easy if it is a through-hull mount. Be sure it is mounted ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top GPS Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30857 Answers

Are you a GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...