Questions & Answers for: husqvarna lawn mowers blade engage

Husqvarna riding lawn mower makes a knocking noise when engaging mower blades model YTH2448T SER # 011106B001224, DOES NOT KNOCK WHEN DECK DISENGAGED, AND WHEN BLADES ARE DISENGAGED AT BELTS AND MOWER

knob on lawn tractor for blade engagement KNOB ON MY HUSQVARNA YTH2148 L021H48G LAWN TRACTOR CAME OUT AND I CAN'T GET IT BACK IN TO ENGAGE THE BLADES Sounds like you need a new PTO switch.

...Husqvarna Yth 180, the lawn mower shut off when I engage the blades to cut grass. I blows the 20 amp fuse near the wire harness try unplugging the pto then start the mower next engage the blades and ...

...Husqvarna 42 " cut Lawn tractor with a 15hp Kawasaki motor....a YTH1542XP....it has started blowing the 20amp fuse after its running awile and when you go to engage the blade with the hydrostatic ...

...engage on Husqvarna riding mower. Our Husqvarna mower is less than 1 year old. It starts easy, the deck will engage but the blades will not engage. What to do??? Could be a broken belt, loose belt ...

...engage the blade. It runs until I try to engage mine has a reverse cut out when blades are running....maybe the switch is bad and thinks mower is in reverse therefore shutting down the mower when the ...

very bad vibration when engaging the blade Bad vibrations when engaging blades is usually caused by an out of balance blade. Out of balance blades occur due to damaged and/or bent blades. The fix is ...

...drive and mow the lawn Check that the blade brake is disengaging.  Slip belt off blade spindles and check that they spin freely.  Check underside of deck for clogged grass, ropes, wire,

...Husqvarna Riding Lawn Mower 46 Cut Kohler Yth21k46 Exsessive vibration is normally attributable to the mower deck. If the vibration is occurring while the blades are engaged and cutting this would ...

pulled the knob to engage blade but blade would not engage.motor stops possible bent damaged seized shaft, look under deck for excess debris, rope, damaged blades