Questions & Answers for: husqvarna yth21k46 mower blade engage

...engage the cutters? if so then chances are on of the blade spindles may be seized or stuck, disconnect the belt from engine pulley and try turn the blade spindle pulleys by hand one at a time to see ...

I am unable to crank my mower. All I get when I try to start it is a audible click. The battery is good. The blades are not engaged. I have the brake depressed. I think it may be the safety switches. ...

very bad vibration when engaging the blade Bad vibrations when engaging blades is usually caused by an out of balance blade. Out of balance blades occur due to damaged and/or bent blades. The fix is ...

Husqvarna riding lawn mower (YTH21K46), mower blade clutch cable routing. I replace the cable from the handle to the pulleys, but it is too loose to engage the pulleys/belt. Where can I get info on ...

What could cause the engine to die when the blades are engaged? Engine dies when blades are engaged. bad safety switch on the seat or the reverse switch is stuck

...engage blade" lever, two things may occur, First, a mechanical action, a spring moves to put tension onto the belt. Second; at the end of its run, actuate a switch (PTF switch) to engage the clutch ...

...Husqvarna Riding Lawn Mower 46 Cut Kohler Yth21k46 Exsessive vibration is normally attributable to the mower deck. If the vibration is occurring while the blades are engaged and cutting this would ...

iz5223 blades wont engage electric clutch wont engage jump the clutch with the battery see if you here engauge if not replace bad clutch

engine runs good but dies when blade or forward/reverse engaged model y2h21k46 You have a safety switch bad. Could be the seat switch or clutch switch.