...thing anyway, will the 88 harness work? The heater fan motor usually only has 2 wires. What harness are you talking about? If it goes to a BCM or the HVAC control, no you cannot use the one you
...control. the HVAC systems use 3 ways and any mix. of controls. cable, vacuum servo, and electric motors all this is covered 100% in the FSM HVAC sections. buy a used FSM off feabay , the day you buy ...
HVAC control module screws. Depress the HVAC control module tabs (3) and remove the HVAC control module (2) from the I/P (4). Disconnect the electrical connectors (1) from the HVAC control module (2).
...major part of car that leaks. where are you in car? there are many SERVOS. (wiki Servo) 4 in the HVAC heater./ a/c system. many in the transmission automatic. and many in the Engine controls ...
Question about 1995 Rodeo
...major part of car that leaks. where are you in car? there are many SERVOS. (wiki Servo) 4 in the HVAC heater./ a/c system. many in the transmission automatic. and many in the Engine controls
...it, first. it has DTC errors
not to be ignored, if present.
let me answer for all car HVAC car owners.
it can be many things.
1: fuses blow (dead fan)
2: wires bad, cut, or ...
...HVAC control module (if equipped). 13.2. Remove the armrest. 13.3. Remove the HVAC module and duct assembly. 13.4. Remove the cupholder. 13.5. Remove the HVAC upper duct. or read the FSM (buy one) ...
...or the resistor block bad, (if it works on high but not low) i have the schmematic in hand. the HVAC relay pulls in by command of the BCM the relay then sends 12vdc power to the blower via fuse
Question about 2006 Ascender
...as if skipping teeth. 1000 points like the first ever here posting a photo. shock, ! the heater (HVAC) controls for mode are failing those are called dampers, old car 93, they all have issues like ...
Usually answered in minutes!
832 Questions
814 Questions
819 Questions
720 Questions
623 Questions