Questions & Answers for: Ford Ranger where is the idle control valve

Question about 2004 Ranger

2 Answers

...Idle Air Control Valve (IAC Valve) goes bad. i got a trouble code looked it up and sure enough it is the IAC Valve. Under 100 bucks for the part My ranger was doing the same. I have the 4.0 engine. ...

Ad

...idle air control valve. Neither of them seem to be causing the problem. The oil pump started ticking the other day and I know I need to replace that but a couple of people have told me the oil pump ...

Ad

Question about 1998 Ranger SuperCab

1 Answer

...idle speed control auxiliary inputs'' and P0306: ''cylinder 6 misfire detected''. this ranger resitates press gas. where do i start? P1507 is "Idle Air Control System Underspeed Error". This code ...

idle air control motor Try cleaning the idle air control valve. On the 4.0 SOHC V6 it is located on the top of the throttle body past the throttle plate area. You'll have to take off the plastis cover

Question about 2000 Ranger SuperCab

3 Answers

...Idle Air Control (IAC) is not working.... This is a very common problem and very easy to fix. The IAC will run you about $50 (USD) and the only tools needed is a 8mm socket. Disconnect the electrical ...

Question about 1992 Ranger

1 Answer

...idle speed control valve and sludged up throttle control valve. Please do the following service to correct it. To correct this problem get a can of throttle valve cleaner (it is made by CRC) from the ...

...valve (EGR valve). This can cause uncontrolled idle speed. If that does not stop the acceleration, try replacing the IACV valve (idle air control valve) if these stick it will raise your idle

Question about 2003 Ranger Regular Cab

1 Answer

Then after driving it tends to come back down to normal. One possibility is a buildup of dirt and sludge in and around the idle air control valve.  The buildup causes the idle air valve to stick

...up high idle like gas pedal stuck Could be a vac leak, or a faulty idle air control valve on the throttle body.The computer controls idle speed by regulating the amount of air entering the

Question about 2000 Ranger SuperCab

1 Answer

...Idle Air Control (IAC) valve - Idle Air Control (IAC) valve harness is open or shorted - Idle Air Control (IAC) valve circuit poor electrical connection What does this mean? Tech notes The P1507 code ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...