Questions & Answers for: Ford injector seals

...to remove the injector. Make sure you replace the gaskets and seals when installing the new injectors. (might need teflon tape around the pipe fitting where the injector feeds from the fuel

...injector on a 99 ford f 359 7.3 engine Hello there : on these injectors they have a seal some of these have a copper crush washer on them to seal them and on some of these havea rubber o ring that ...

injector seals replaced on the car and seens had injector seals replaced on the ford fiesta and seems after the car is running flat not picking up speed and the turbo is running fine and injectors are

...2001 ford P71...while i was removing the bracket which runs over top of them an orange colored fuel injector started spewing out gas now i have gas leaking out and CANT GET IT TO STOP! THE gas spews ...

...injector rack down. remove them and they should all come up with it. before doing so, releave the fuel presure from the system. unplug the injectors and install the new ones with new seals. make sure ...

replace fuel injector on 2001 expedition Changed spark plug and had to loosen injector rod; now fuel is spewing then I try to start the engine. Is there a seal on top of the injector or just on the ...

cleaning injectors on 4.9 ford inline six how can I clean injectors besides running fluid or cleaner thru the gas tank? You can have them professionally cleaned, but I have made a wiring harness with ...

Why dose my 2004 Ford taurs start out flooding and missing and then clear up if it has injectors , check the injectors and seal under the injectors as it indicates leaking tips

Unbolt the fuel rail and lift up, then replace the injector seals (lightly oil seals) and reinstall new rail on injectors and push rail and attached injectors back into the intake holes, very easy job

...what else should I check to stop the leaking? remove and replace the injector seals common rail system if there are pipes to the injectors , tension the nuts or replace the pipes ( broken at the