cover. Press on the tab to release the ink tank, then remove it from its slot. If you are replacing multiple ink tanks, make sure to replace one by one. Insert the ink tanks into the print head. Note:
Question about MFC 3100C All-In-One InkJet Printer
...t do anything print head will not move to install new ink cart. and LCD says PLS open cover open the cover of your printer and ink cartridge will move to the left therefore allow you to change your ...
...going to open, it's the ink cover (the one at the bottom right face of the machine), click off the lever and the cartridge will be released, then replace it with the new one and close the cover
not when trying to print it says that the cover is open but its not...We just changed the ink cartridge Open the cover, remove the ink cartridges, reinstert them, close the cover, and power it back on
Question about MFC 420CN All-In-One InkJet Printer
...Ink Empty Black and Cover is Open. Pull the ink cartridge hook toward you and remove the ink cartridge for the color shown on the LCD. Open the new ink cartridge bag for the color shown on the LCD, ...
Question about PIXMA MP530 All-In-One InkJet Printer
ink tanks are installed. 7) Close the Inner Cover. Note: Ensure that the Inner Cover is closed, Printing will not occur if the Inner Cover is open. Hope this help. PLease rate my response. Thanks have
cover. Remove the ink tanks by pressing the tab of each tank. Caution: Handle the ink tanks with care so that your clothes and surrounding area do not get soiled. Make sure to remove the ink tanks one
Question about PIXMA iP4200 InkJet Photo Printer
...Cover is closed if an ink tank is not installed properly. Open the Top Cover and make sure that all the ink tanks are installed in the correct order directed on the label. To maintain optimal print ...
Question about MFC 420CN All-In-One InkJet Printer
...ink cover but the ink cover is close and the ink is full? Hi, Try taking out all cartridges, unplug the printer a few minutes. re plug , turn on. with ink cover open. then close cover and wait to ...
Question about WorkForce WF-7620 Wireless Color All-in-One Inkjet Printer
...by hand the ink carriage an inch to the right. Close cover. Press OK on the printer panel. This resets the error ink cover is not closed. WORKS! haha the move to right works on wf 7710 also , ty ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions