Questions & Answers for: Chevrolet install filter

...Filter from the mounting bracket To install: Install or connect the following: Fuel filter into the mounting bracket and torque the bolt to 15 ft. lbs. (20 Nm) Quick-connect fitting on the inlet side ...

Ad

...connect fitting from the fuel filter by squeezing the plastic tabs . Remove the fuel filter. Install new filter and make connections of fuel lines Check for fuel leaks after installation is

Ad

filter from the mounting bracket To install: Install or connect the following: Fuel filter to the mounting bracket Fuel line. Torque the fuel line fitting to 20 ft. lbs. (27 Nm). Quick-connect fitting

Question about 2002 S-10

1 Answer

...Install or connect the following: NOTE The filter has an arrow (fuel flow direction) on the side of the case, be sure to install it correctly in the system, the with arrow facing away from the fuel ...

Question about 2004 Silverado 1500 Crew Cab

1 Answer

...filter as follows: Install a hose on the water drain on the water-in-fuel sensor. Place the other end of the hose into an approved container. Drain as much fuel as possible from the fuel filter ...

...install: Before installing a new filter, apply a few drops of clean engine oil to the male tube end of the filter. This will ensure proper attachment and prevent a fuel leak. Position the filter into ...

Question about 1994 S-10 Blazer

2 Answers

filter to the vehicle. Install or connect the following: Filter to its bracket finger-tight New gaskets and connect the high pressure hose and eye bolt, then the main pipe. Tighten the eye bolts to 22

Question about 2003 Tahoe

1 Answer

...If it worked well before you serviced it, then I suggest you double-check your work. You may have installed the wrong filter, your trans (4L60-E) has 3 different filters. I have rebuilt many of ...

Question about 1995 Caprice Classic

1 Answer

...filters on 1995 caprice filter there is only one . drop trany pan unbolt filter install new inreverse of how you took out the old one .I install 5 qt dextron 3 start engine and finish ...

...mount through-bolts. Install the starter. Install the flywheel inspection cover. Install the engine oil filter and the engine oil. Install the oil filter adapter. Install the oil level indicator

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...