kenmore elite water filter Hi I recently installed a whole house water filter. My kenmore elite refrigerator (trio) filter was about a year old so I removed it and installed the plug. No need for ...
...filter and install it on a new filter using a new gasket. To install: Install a new filter in the direction of flow. Always replace the copper gaskets. Replace the attaching screws. Install the ...
filter. To install: Remove any fuel line caps. Install the new fuel filter, connecting the quick-release and spring-lock couplings. Install the fuel filter shield. Install the fuel filter heat shield.
...Install the fuel filter into the fuel filter bracket. For vehicles with a 4.2L engine, install the screw into the fuel filter bracket. Torque the screw to 13 in-lb (1.5 Nm). For vehicles with a 5.3L ...
install a new filter, and remember to put a light coating of oil on the base of the new filter. All oil filters have gaskets and can leak. Change the filter and wipe the seat on the block clean with a
Question about Motor 2004 Sonata
...filter To install: Fig. Remove the fuel filter Install or connect the following: Fuel filter and torque the mounting bolts to 18-25 ft. lbs. (25-35 Nm)Fuel filter bracket, if equippedFuel supply and ...
Question about Motor 2004 Sonata
...out. put filter there is water going to the filter. Water comes out of the hole where the filter is installed. Nothing when it is installed Sounds like a problem with filter. Was it having problems ...
Question about Motor 2004 Sonata
...trying to replace water filter. No water in the filter I replaced. store indicated it was not installed correctly. Should the filter turn when installed? Water filter replacement Model ...
...installed just before the air return. If the furnace is in the attic or in a crawlspace, I never install a filter in these areas, but put a return filter grill in the return path. Hope this ...
Question about Motor 2004 Sonata
...the old filter frame (if present) by sliding it out towards you. Remove old filter from its frame and install new filter, ensuring that Air Flow arrow is pointing down. 4. Install in reverse
Usually answered in minutes!
1,045 Questions
774 Questions
337 Questions
287 Questions
