Questions & Answers for: how to install a hood

Ad

Question about Microwave Ovens

1 Answer

...hood should have electrical wiring but do I still need to install an outlet in the cabinet after I removed the range hood and light? Thanks I just took out the range and made an outlet out of the ...

Ad

...hood. Called Viking. Authorized Viking tech came to inspect and suggested installation is incorrect. (charged about $200 for a 5min inspection!) Hired an electrican to re-install. Same problem. ...

Ad

Question about JXT8142ADS Kitchen Hood

1 Answer

...outside wall. i'm having my siding done soon and i need to install my hood which will vent out a side wall install ducting along with closing flap (so outside wind does not blow in) and power first

Question about DKE 9365 Stainless Steel Kitchen Hood

2 Answers

...install a chimney cover there should be 2 or 3 peices of alum off the hood predrill hole's then rivet or steel screws I have touch screen kitchen chimey of glen make, how to install it give the ...

Question about 1998 Explorer

1 Answer

Installing hood struts Anyone know how I would go about installing/changing the hood struts on my car? take something to hold the hood up and take a flathead screw driver and pull the pins out on the ...

Question about KHVU781RSS Stainless Steel Kitchen Hood

2 Answers

...Install the hood cover to the load-bearing ceiling frame with the package hardware through the four inside mounting corner flanges on the cover.9.Measure what will be the distance from the bottom of ...

Question about 2001 Cavalier

1 Answer

Install the hood close out filler panel. Install the hood close out filler panel retainers. Removal & Installation Disconnect the negative battery cable. Remove the hood close out filler retainers

install the hood and align the matchmarks. Tighten the bolts securely. Before removing the hood, matchmark the hood hinge to the hood If equipped, disconnect the hood light wire harness plug . . . . .

...hood. Install the hinge-to-hood bolts, the hood support and the hood support bolts. If so equipped, install the washer hose. Tighten all bolts securely and check the hood for proper alignment. ...

Hood not getting power. Authorized viking tech said I need to get an installer to remove the hood before he could see what the problem is. Is this typical of techs to not remove to troubleshoot? ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a Microwave Ovens Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...