Questions & Answers for: install remove

...Remove the transmission cooler line retaining clips Fig. Fig. 5: Install the release tool onto the cooler line and release the fitting Fig. Fig. 6: The upper radiator retaining screws are accessible ...

Ad

...Remove bolts and separate ignition switch from steering column. To Install: Install ignition switch to steering column and install bolts. Raise steering column and install mounting fasteners. Install ...

Ad

...Remove the expansion (orifice) tube from the evaporator. To Install: Install the expansion (orifice) tube to the evaporator. Install the evaporator core to the blower case. Attach the evaporator case ...

Remove the water pump. Water pump removal/installation To Install: Install the water pump with new gasket. Install the timing belt covers. Install the crankshaft pulley. Install the water pump pulley.

...Remove the evaporator core. HVAC module mounting fastener locations HVAC module components To Install: NOTE: If a new evaporator is being installed, add 3 fl oz (90 ml) of refrigerant oil to the new ...

...Remove the thermostat. Clean the mating surfaces. To Install: Install the thermostat on the engine. NOTE: Apply RTV sealer to the thermostat housing bolt threads. Install the thermostat housing and ...

Question about 2002 Aztek

1 Answer

...REMOVE STRUT ASSEMBLY.TO INSTALL ***** INSTALL STRUT INTO THE STRUT TOWER ALIGNING THE PAINT MARKS MADE DURING REMOVAL.INSTALL UPPER MOUNTING NUTS AND TIGHTEN TO 34 - 46 FT LBS. INSTALL STRUT TO ...

Question about 2004 Freestar

2 Answers

...Remove the in-vehicle temperature sensor. To Install: Install the in-vehicle temperature sensor. Install the in-vehicle temperature sensor screws. Connect the in-vehicle temperature sensor aspirator ...

Question about 2002 Rendezvous

1 Answer

...Remove the thermostat. Clean the mating surfaces. To Install: Install the thermostat on the engine. NOTE: Apply RTV sealer to the thermostat housing bolt threads. Install the thermostat housing and ...

...Remove the heater unit. To install: Install the heater unit. Install the instrument panel. Connect the instrument panel wiring harness connectors. Install the bottom mounting bolts. Install the T-bar ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...