Questions & Answers for: install thermostat car

...Install the thermostat. Install the thermostat housing and bolts. Install the coolant housing bolts. Tighten bolts to 14 Nm (10 ft. lbs.). Install the lower radiator hose to thermostat housing. Fill ...

Ad

...install thermostat? Thermostat Removal & Installation 3.4L & 3.5L Engine To Remove: Drain the coolant below the level of the thermostat. Remove the air cleaner and duct assembly. Remove the ...

Ad

Question about 2002 Aztek

1 Answer

...Install the thermostat. Install the thermostat housing. Install the thermostat housing bolts and tighten to 18 ft. lbs. (25 Nm). Install the radiator inlet hose to the thermostat housing. Install the ...

Question about 2000 Esteem

1 Answer

...case. Install thermostat cap. When installing cap, align arrow marks on cap and case. Connect radiator hose to thermostat cap. Fill cooling system. After installation, check each part for

Question about 2002 Cavalier Coupe

2 Answers

...Install the thermostat. Install the thermostat housing to water pump feed pipe. Fig. Install the thermostat housing to water pump feed pipe Install the thermostat housing to water pump feed pipe bolt ...

Question about 2002 Rendezvous

1 Answer

...Install the thermostat on the engine. NOTE: Apply RTV sealer to the thermostat housing bolt threads. Install the thermostat housing and gasket with the mounting bolts. Tighten 18 ft-lb (25 Nm). ...

...Procedure Remove the thermostat housing. Remove the thermostat. Clean the mating surfaces.Installation Procedure Install the thermostat. Install the thermostat housing. Inspect the system for

Question about 2005 Malibu

2 Answers

Install the thermostat on the housing. Install the water pump feed pipe on the thermostat housing with the mounting bolts. Tighten 89 in-lb (10 Nm). Fill the cooling system. 2006-2007 To Remove: Drain

...Install the thermostat. Install the thermostat housing using a new gasket. Install the thermostat housing bolts. Tighten the thermostat housing bolts to 89 INCH lbs. (10 N.m). Connect the radiator ...

...Install the thermostat. Install the thermostat housing. Install the thermostat housing bolts and tighten to 18 ft. lbs. (25 Nm). Install the radiator inlet hose to the thermostat housing. Install the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...