Question about Compaq dc7600 PC Desktop
ip address or a 0.0.0 all i get is Media is disconnected. If i hook up directly into their router with an ethernet cable i can get connection..What am I doing wrong? It is possible that the encryption
IP address reset Any time power is lost to the printer the IP address changes. As a result I must go into each computer and reset the IP address to match the printer. Pain in the rear. why is this ...
Question about DesignJet Z2100 InkJet Photo Printer
...IP address to track the amount of traffic you're generating on Yahoo, and once you reach the limit you get blocked by the Unable to process request at this time -- error 999 message. Once triggered ...
...printer status says ready but when I try to print I get an error. help! try the usb cable if the computer can print print test that would be the network is wrong ip address that declare you on ...
Question about Photosmart C6180 All-In-One InkJet Printer
...IP address, setting an access password, configuring it to connect to the wireless network, installing the drivers that allow the print server to use the printer and installing the print drivers on ...
Question about Officejet 6500 Wireless All-in-One InkJet Printer
...is mentioned in the printer and in case there is a router connecting your printer and system then use the IP address of router and put it in your system. This should help you fix this printer
Trying to connect to 192.168.1.1 to set up wii on Actiontec wireless router. can't do it. why? It's probably the wrong ip address to setup the Actiontec wireless router. Try 192.168.1.254.
if so, your router may have given it a new IP address. Use the keys on the printer to find the IP address in the printer settings, and then update the IP address for the printer port in your computer
...IP address of the printer and try to ping it from the computer. If you can ping the IP address then we need to setup your computer to print to the right IP address. If you cannot ping the IP address ...
...Wrong cable! You need an Ethernet cable that is specially wired as a "cross-over" cable, where the 'send' wire on one end is crossed-over to the 'receive' wire at the other end and the 'send' wire at ...
Usually answered in minutes!
5,069 Questions
2,066 Questions
1,757 Questions
1,195 Questions
1,096 Questions
